Home / Free adult latina cams / Polycom ip phone updating initial configuration

Polycom ip phone updating initial configuration

I've seen mention elsewhere of having to put in special stuff for Polycom phones, but I've not had to do it with the firmware I'm using.These SIP extension setup instructions are pretty standard: In extensions.conf, add a SIP extension as normal.Asterisk Bulk Provisioning Polycom Phones tutorial Set up and start up your TFTP server and make sure the files from the Boot ROM and the SIP archives are un ZIPped and in the root TFTP directory.By default, the root TFTP directory is tftpboot, but this may be different on your machine if someone has changed it.

A firmware fix for this was promised in October 2005, but I decided to not wait and get some Polycom 501 phones as well, as Polycom phones are legendary for being excellent speakerphones, and the 501 model was their lowest priced speakerphone model.The relevant options for Asterisk configuration are buried fairly deep on the console, and the big problem with the web interface is that it takes at least an extra minute to become available even AFTER the phone is up and running.And, of course, every time you make ANY change in ANY section of the web interface and click "Submit," it has to do a soft boot..... It makes the XML/TFTP configuration option look pretty good, even for just a few phones.I also don't go into pushing out configurations from XML files on a TFTP server, but it may be the way to go if you're doing more than one phone.In the instructions below, TFTP is only really used to push out the firmware updates.This is because the web configuration for the time server and GMT offset differs from what is loaded on the actual phone itself.When the web interface finally starts up 1-2 minutes after the phone is ready, it reloads that info instead.At time of this writing, Grandstream GXP-2000's are around 5, and Polycom 501's are around 0.The Polycom 501's do have more and easier-to-get-to functionality than the GXP-2000's, and have a more professional look and feel (and a great speakerphone), but the most notable downsides of the 501 are its awful, obtuse and slow configuration interfaces.They will only allow CERTIFIED resellers to download their updates and they're supposed to provide you with those updates.Polycom Voice Products Download List you Linux newbies, an easy way to download the files directly into your tftp root folder is the utility WGET. The following information isn't really the "optimal" way of setting these phones up.

626 comments

  1. This guide shows you how to provision a Polycom® phone with. computer’s firewall to allow the IP phone to. for all Polycom phone models. All configuration.

Leave a Reply

Your email address will not be published. Required fields are marked *

*